The correct way to wear masks wholesale products.


Release time:

2024-03-14

Nowadays, there is a great demand for masks, so many people have started the business of wholesale masks, so after buying back masks, how should we wear them correctly. As we all know, if there is a gap between the mask and the face of the human body, then in the process of breathing, the outside air flow will give priority to the gap, and the outside world is attached to the dust of the virus.

口罩批发

Nowadays, there is a great demand for masks, so many people have started the business of wholesale masks, so after buying back masks, how should we wear them correctly.

As we all know, if there is a gap between the mask and the face of the human body, then in the process of breathing, the outside air flow will give priority to the gap, and the dust attached to the virus, aerosol droplets and so on, may be accompanied by the airflow through the gap into the human body, resulting in infection. Therefore, it is necessary to standardize the wearing of masks. After the wholesale of masks, when wearing masks, the radian reservation layer of the mask should be fully unfolded first, then the mask should be fixed on the human face through the ear band, then the nose and mouth should be completely wrapped, and then the metal strip of the mask on the bridge of the nose should be tightly squeezed to make the mask completely fit the bridge of the nose, and then the seal of the chin should be adjusted. If necessary, you can tie the lanyard behind the brain and tie a knot to improve the tightness of the mask. During the whole wearing process, you must avoid directly touching the outside of the mask with your hands.

When many people wholesale masks, they actually can't tell the front and back of the mask. In fact, the medical masks that everyone uses in daily life are divided into three layers, and the outer layer is the main interlayer, the middle layer is the filter layer, and the inner layer is the moisture absorption layer. The absorption layer can completely absorb the moist gas exhaled from the mouth and nose to keep the mask dry. At this time, if the mask is worn backwards, the gas we exhale cannot be effectively absorbed, so the mask is easily wet and loses its protective effect. Before wearing a mask, be sure to put the nose clip side of the mask up and the dark face facing the outside. If there is no color difference, it can be judged by folds, which are usually the outer layer vertically downward,

Under normal circumstances, medical surgical masks and medical masks are limited to use, and the cumulative use time cannot exceed 8 hours. If the mask is worn in a place with a large flow of people, it cannot be used after more than 4 hours. If it is found that the wholesale mask products are damaged or damaged or even contaminated, there is a peculiar smell when affected with moisture, and the respiratory resistance is obviously increased, and masks cannot be used if they cannot fit the human face. Some people will pull the mask to the chin when wearing a mask, thus revealing the mouth and nose parts, which not only makes the mouth and nose parts. Without protection, it may even contaminate the inner layer of the mask, so don't pull it to the chin or hang it on the arm, and don't touch the outside of the mask.

Key words:

RELATED INFORMATION

2024/03/14

Are you wearing a mask correctly?

Winter is a common season to wear masks, coupled with the impact of the epidemic, wear more. So you usually use the method of wearing a mask right? Next, the general medical mask manufacturers Xiaobian brief introduction, you can refer to see.

2024/03/14

How long can ordinary medical masks be worn?

The protective power and wearing time of ordinary medical masks are our concerns. Although it is important to pay attention to the filtering power when selecting medical masks, it is also necessary to select good sealing performance. So how long can ordinary medical masks be worn? The following small series for everyone to introduce:

2024/03/14

How to distinguish between ordinary medical masks and medical surgical masks

How to distinguish between ordinary medical masks and medical surgical masks, the following is a brief introduction: 1. The external packaging of medical surgical masks and ordinary medical masks is different. The implementation standards of registered products in the upper right corner of the outer packaging of medical surgical masks are different. Medical surgical masks are printed with YY-0469-2011, while ordinary medical masks are printed with YZB/and various manufacturers' labels.

2024/03/14

Methods and precautions for the use of medical masks

Medical masks are made of one or more layers of non-woven composite, the main production process includes meltblown, spunbond, hot air or needle, etc., with resistance to liquid, filter particles and bacteria and other effects, is a kind of medical protection textiles. The following medical mask manufacturers briefly introduce its use and matters: